How To Reset Your Whirlpool Refrigerator: A Simple Guide

Refrigerators are essential appliances in any home, and Whirlpool refrigerators are some of the most popular models on the market. But like any appliance, they can sometimes experience problems. Luckily, most Whirlpool refrigerators are equipped with a reset button that can help you troubleshoot any issues. In this blog post, we’ll show you how to reset your Whirlpool refrigerator and get back to enjoying the convenience of cold food and drinks.

How To Reset Refrigerator Whirlpool

To reset a refrigerator Whirlpool, you will need to unplug the refrigerator for 2–3 minutes. This will reset the control board and should allow the refrigerator to start cooling again.

If the refrigerator is still not cooling after unplugging it, there are a few things you can check:

1. Check the temperature setting: Make sure that the temperature setting on the refrigerator is set to a low enough temperature for the refrigerator to start cooling.

2. Check the refrigerator’s vents: Make sure that the refrigerator’s vents are not blocked by anything, and that the vents are not blocked by ice.

3. Check the refrigerator’s power supply: Make sure that the refrigerator is plugged into a working electrical outlet and that the outlet is not controlled by a switch.

4. Check the refrigerator’s fan: Make sure that the refrigerator’s fan is running. If the fan is not running, you may need to replace the fan.

5. Check the refrigerator’s thermostat: Make sure that the refrigerator’s thermostat is working properly. If the thermostat is not working properly, you may need to replace it.

If the refrigerator is still not cooling after checking all of these things, you may need to call a service technician to diagnose and repair the problem.

What Are The Different Models Of Whirlpool Refrigerators?

• 1. Side-by-Side Refrigerators: These models offer ample storage space and easy access to both fresh and frozen items. They feature two vertical compartments, one for food and one for freezer, and often include water and ice dispensers on the door.
• 2. French Door Refrigerators: These models feature two side-by-side doors that open from the middle, providing access to both fresh and frozen items. They offer a sleek, modern look and often include features such as adjustable shelves, LED lighting, and temperature control drawers.
• 3. Top-Freezer Refrigerators: These models feature a single compartment for the freezer on top and a single compartment for food on the bottom. They offer a classic design and are often more affordable than other models.
• 4. Bottom-Freezer Refrigerators: These models feature a single compartment for the freezer on the bottom and a single compartment for food on top. They offer a more traditional design and are often preferred by homeowners who like easy access to frozen items.
• 5. Compact Refrigerators: These models offer a smaller footprint and are perfect for small spaces, such as apartments, dorm rooms, or offices. They often include features such as adjustable shelves and temperature controls, and are available in a range of sizes to suit your needs.

Where Is The Reset Button On A Whirlpool Refrigerator?

The reset button on a Whirlpool refrigerator is typically located on the back of the refrigerator, near the compressor. It may also be hidden behind a small access panel.

To locate the reset button:

1. Turn off the refrigerator and unplug it.

2. Locate the compressor on the back of the refrigerator. It is the large, black, or silver box near the bottom of the refrigerator.

3. Look for a small, red, or yellow button near the compressor. It may be labeled “Reset” or “Start/Reset.”

4. Press the button and hold it for three seconds.

5. Plug the refrigerator back in and turn it on.

6. If the refrigerator does not start or continues to have problems, contact Whirlpool for assistance.

Note: The location of the reset button may vary depending on the model and age of your refrigerator. If you do not see a reset button, or if you cannot access it, contact Whirlpool for assistance.

How Do You Reset A Whirlpool Refrigerator?

To reset a Whirlpool refrigerator, follow these steps:

1. Unplug the refrigerator from the power outlet.

2. Locate the refrigerator’s reset button, which is usually located on the back of the unit or inside the refrigerator’s control panel.

3. Press and hold the reset button for 10 seconds.

4. Release the reset button.

5. Plug the refrigerator back in and wait for the ice maker to cycle.

6. Test the refrigerator’s functions, such as the temperature settings and the ice maker, to ensure they are working properly.

If the reset does not fix the issue, you may need to contact Whirlpool for assistance. They may be able to provide additional troubleshooting steps or recommend a repair.

What Happens When You Reset A Whirlpool Refrigerator?

When you reset a Whirlpool refrigerator, all settings will return to their default or factory settings. This includes the temperature settings for both the refrigerator and the freezer, as well as any programmed settings such as ice cube size, water dispenser settings, and lighting settings.

To reset a Whirlpool refrigerator, follow these steps:

1. Locate the control panel on the front of the refrigerator.

2. Press and hold the “Cancel” button for at least 3 seconds.

3. Release the “Cancel” button.

4. The refrigerator should now be reset and will return to its default settings.

It’s important to note that resetting a refrigerator will not affect the temperature or food inside. However, if you reset your refrigerator and notice that it is no longer cooling properly, you may need to adjust the temperature settings or troubleshoot the issue further.

How Long Does A Whirlpool Refrigerator Take To Reset?

A Whirlpool refrigerator typically takes between 2 and 4 hours to reset. However, this time can vary depending on the model and the specific issue.

To reset a Whirlpool refrigerator, follow these steps:

1. Unplug the refrigerator from the power outlet.

2. Wait 2 to 4 hours.

3. Plug the refrigerator back into the power outlet.

4. Press the “Power On/Off” button on the front of the refrigerator.

5. Press and hold the “Temperature Up” button for 3 seconds.

6. Press the “Temperature Down” button for 3 seconds.

7. Press the “Temperature Up” button for 3 seconds.

8. Press the “Temperature Down” button for 3 seconds.

9. Release all buttons.

10. Press the “Power On/Off” button again to turn the refrigerator back on.

It’s important to note that resetting a refrigerator will not fix all issues. If the refrigerator continues to have problems after resetting, you may need to contact a professional for service.

Final Thoughts

In conclusion, resetting your Whirlpool refrigerator is a simple process that can be done with a few simple steps. By following this guide, you will be able to get your fridge back to its default settings in no time. So, don’t wait any longer and give your refrigerator a fresh start today!