Why Is My Beko Frost Free Freezer Not Freezing? Here’s The Fix!

There are many reasons why your Beko frost free freezer is not freezing. It could be a thermostat problem, a blocked air vent, a clogged drain, a faulty fan, or a problem with the defrost timer. In this blog post, we will explore each of these reasons in more detail and provide some tips on how to troubleshoot and fix them.

Why Is My Beko Frost Free Freezer Not Freezing?

If your Beko frost free freezer is not freezing, there could be several reasons for this. Here are some troubleshooting steps you can try:

1. Check the temperature setting: Make sure that the temperature setting on the freezer is set to the correct level. The recommended temperature for freezing food is 0°F (-18°C).

2. Check the freezer compartment: Make sure that the freezer compartment is clean and free from any food debris or ice buildup. This can prevent the freezer from functioning properly.

3. Check the seals: Make sure that the seals around the freezer door are clean and in good condition. A broken seal can cause the freezer to lose cold air, which can prevent it from freezing.

4. Check the power supply: Make sure that the freezer is receiving the correct power supply. If the power cord is loose or frayed, it can prevent the fridge from functioning properly.

5. Check the defrost system: Make sure that the defrost system is working properly. The defrost system helps to keep the freezer compartment free from ice buildup, which can prevent it from freezing.

6. Check the condenser coils: Make sure that the condenser coils are clean and free from any dust or debris. The condenser coils are responsible for cooling the refrigerant, which is necessary for freezing.

7. Check the evaporator fan: Make sure that the evaporator fan is working properly. The evaporator fan is responsible for circulating cold air throughout the freezer compartment, which is necessary for freezing.

8. Check the refrigerant level: Make sure that the refrigerant level is correct. If the refrigerant level is too low, it can prevent the fridge from functioning properly.

If none of these troubleshooting steps help, it may be necessary to call a service technician to diagnose and fix the problem.

How Do I Troubleshoot A Beko Frost-free Freezer That Is Not Freezing?

• 1. Check the temperature setting: Make sure the temperature setting on the freezer is set to the correct level. It should be set to 0°F (-18°C) for normal freezing.
• 2. Check the freezer door: Make sure that the freezer door is properly closed and sealed. A loose door can cause warm air to enter the freezer, preventing the freezer from reaching its desired temperature.
• 3. Check the power supply: Make sure that the freezer is receiving the correct voltage and amperage from the power supply. A faulty power supply can prevent the freezer from functioning properly.
• 4. Check the evaporator fan: Make sure that the evaporator fan is running. The fan helps to circulate cold air throughout the freezer, so if it is not running, the freezer may not freeze properly.
• 5. Check the defrost system: Make sure that the defrost system is functioning properly. The defrost system helps to prevent ice buildup on the evaporator coils, which can impact the performance of the freezer.

What Are The Common Causes Of A Beko Frost-free Freezer Not Freezing?

A Beko frost-free freezer not freezing can be due to several common causes, including:

1. Power supply issues: Ensure that the freezer is receiving sufficient power by checking the outlet voltage with a multimeter or by checking the circuit breaker or fuse.

2. Thermostat problems: The thermostat may not be functioning properly, causing the freezer to cycle on and off frequently. Check the temperature setting and adjust if necessary.

3. Condenser issues: The condenser is responsible for cooling the refrigerant, and if it is dirty or clogged, it may not be able to effectively cool the freezer. Clean the condenser coils with a brush or vacuum cleaner.

4. Evaporator fan issues: The evaporator fan is responsible for circulating cold air throughout the freezer, and if it is not working properly, the freezer may not reach the desired temperature. Check the fan for obstructions and clean it if necessary.

5. Door seal issues: The door seal should be airtight to prevent warm air from entering the freezer. If the seal is loose or damaged, cold air may escape, causing the freezer to not freeze properly. Replace the seal if necessary.

6. Overloading the freezer: Overloading the freezer can cause the evaporator coils to become too cold, causing the freezer to not freeze properly. Avoid placing too much food in the freezer at once.

7. Faulty defrost system: If the defrost system is not functioning properly, it can cause the freezer to ice up, preventing the freezer from reaching the desired temperature. Check the defrost heating element or thermostat for any issues.

To troubleshoot a Beko frost-free freezer not freezing, start by checking the power supply, thermostat, condenser, evaporator fan, door seal, and defrost system. If the problem persists, contact a professional for assistance.

How Do I Clean The Condenser Coils On A Beko Frost-free Freezer?

Cleaning the condenser coils on a Beko frost-free freezer is an important part of maintaining the appliance and ensuring it continues to function properly. The condenser coils are responsible for dissipating heat from the refrigerant, and if they are dirty, they can reduce the amount of heat that can be dissipated, causing the freezer to work harder and reducing its efficiency.

To clean the condenser coils on a Beko frost-free freezer, follow these steps:

1. Unplug the freezer and allow it to defrost completely. This will make it easier to access the condenser coils.

2. Locate the condenser coils. They are typically located on the back of the freezer, near the bottom. There may be a grille or cover over the coils, which you will need to remove to access them.

3. Use a soft brush or vacuum cleaner to clean the coils. Be careful not to damage the coils, as they are delicate.

4. Use a can of compressed air to blow out any remaining dust or debris from the coils.

5. Replace the grille or cover, and plug the freezer back in.

It is important to regularly clean the condenser coils on your Beko frost-free freezer to ensure it continues to run smoothly and efficiently. By following these steps, you can keep your freezer in good condition for years to come.

How Do I Adjust The Temperature On A Beko Frost-free Freezer?

The Beko Frost-free freezer uses a digital control system that allows you to easily adjust the temperature. Here’s how you can adjust the temperature on your Beko Frost-free freezer:

1. Press the “+” or “-” button to increase or decrease the temperature setting.

2. Once you have set the temperature, press the “OK” button to confirm the setting.

3. The freezer will now automatically adjust to the new temperature setting.

It’s important to note that the ideal temperature for storing food in a freezer is between -18°C and -20°C. This temperature range helps to preserve the quality of the food for a longer period of time. It’s also a good idea to check the manufacturer’s instructions for your specific freezer model to ensure that the recommended temperature range for storing food is accurate.

How Do I Check The Evaporator Fan On A Beko Frost-free Freezer?

To check the evaporator fan on a Beko frost-free freezer, follow these steps:

1. Unplug the freezer and allow it to cool to room temperature.

2. Locate the evaporator fan in the freezer compartment. It is usually located behind a grille or cover in the freezer compartment.

3. Remove the grille or cover to expose the evaporator fan.

4. Check the fan blades for obstructions or damage. If the blades are damaged or obstructed, they may not be able to spin freely, causing the freezer to overheat or not cool properly.

5. If the blades are unobstructed, try spinning the fan by hand. If the fan does not spin freely, it may need to be repaired or replaced.

6. If the fan spins freely, check the wiring and connections for any loose or frayed wires.

7. If the wiring and connections are secure, try plugging the freezer back in and checking the temperature. If the freezer is still not cooling properly, the problem may be with the defrost system or the compressor.

It is important to check the evaporator fan regularly to ensure that it is functioning properly. If the fan is not functioning properly, it can cause the freezer to overheat or not cool properly, which can result in damage to the freezer and its contents.

Wrap-Up

In conclusion, if your Beko frost free freezer is not freezing, there are several potential causes that should be considered. These causes can range from issues with the freezer’s thermostat, to problems with the evaporator fan motor, or even an issue with the coolant system. It is important to identify the root cause of the problem and take appropriate steps to repair it, in order to maintain the efficiency and functionality of your freezer.